67-21SUGC-S400-A4-TR8中文资料

2023年12月22日发(作者：本田所有车型及图片)

元器件交易网RLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet

TOP View LEDs

67-21SUGC/S400-XX/TR8

Features

?P-LCC-2 package.

?White package.

?Optical indicator.

?Colorless clear window.

?Wide viewing angle.

?Suitable for vapor-phase reflow, Infrared reflow

and wave solder processes.

?Computable with automatic placement equipment.

?Available on tape and reel (8mm Tape).

?Pb-free

?The product itself will remain within RoHS compliant

version.

Descriptions

?The 67-21 series is available in soft orange,

green,blue and yellow. Due to the package design,

the LED has wide viewing angle and optimized

light coupling by inter reflector. This feature

makes the SMT TOP LED ideal for light pipe

application. The low current requirement makes

this device ideal for portable equipment or any

other application where power is at a premium.

Applications

?Automotive: backlighting in dashboard and switch.

?Telecommunication: indicator and backlighting in

telephone and fax.

?Flat backlight for LCD, switch and symbol.

?Light pipe application.

?General use.

Device Selection Guide

Chip

Material Emitted ColorInGaN Super Green

Lens Color

Water Clear

Everlight Electronics Co., Ltd. Rev. 3 Page: 1 of 9

Device No. : DSE-671-213 prepared date:07-29-2005 Prepared by: Bennett

元器件交易网RLIGHT ELECTRONICS CO.,LTD.

67-21SUGC/S400-XX/TR8

Package Dimensions

Everlight Electronics Co., Ltd. Rev. 3 Page: 2 of 9

Device No. : DSE-671-213 prepared date:07-29-2005 Prepared by: Bennett

元器件交易网RLIGHT ELECTRONICS CO.,LTD.

Notes: .All dimensions are in millimeters

67-21SUGC/S400-XX/TR8

Unit

V

℃

℃

℃

V

mW

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating

Reverse Voltage

Forward Current

Operating Temperature

Storage Temperature

Soldering Temperature

Electrostatic Discharge

Power Dissipation

Peak Forward Current(Duty 1/10

@ 1KHZ)

VR 5

Topr

Tstg

Tsol

ESD

Pd

IFP

-40 ~ +85

-40~ +100

260 (for 5 second)

150

110

IF 25 mA

100 mA

Electro-Optical Characteristics (Ta=25℃)

ParameterSymbol

*Chip

Rank.

Min. Typ. Max. Unit

ConditionA4 150 279

Luminous Intensity

Iv

2θ1/2

----- mcd

A5 250 432

X6 300 500

----- ----- 120 ----- deg

IF=20mAViewing Angle

IF=20mAPeak Wavelength

Dominant WavelengthSpectrum Radiation

Bandwidth

Forward Voltage

λp ----- ----- 518 ----- nm IF=20mAλd ----- ----- 525 ----- nm IF=20mA?λ ----- ----- 35 ----- nm IF=20mAVF

IR

----- ----- 3.5 4.3

V

----- ----- ----- 50

μA

IF=20mAVR=5V Reverse Current

*67-21SUGC/S400-XX/TR8

Chip Rank

Everlight Electronics Co., Ltd. Rev. 3 Page: 3 of 9

Device No. : DSE-671-213 prepared date:07-29-2005 Prepared by: Bennett

元器件交易网RLIGHT ELECTRONICS CO.,LTD.

67-21SUGC/S400-XX/TR8

Typical Electro-Optical Characteristics Curves

Everlight Electronics Co., Ltd. Rev. 3 Page: 4 of 9

Device No. : DSE-671-213 prepared date:07-29-2005 Prepared by: Bennett

元器件交易网RLIGHT ELECTRONICS CO.,LTD.

67-21SUGC/S400-XX/TR8

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Everlight Electronics Co., Ltd. Rev. 3 Page: 5 of 9

Device No. : DSE-671-213 prepared date:07-29-2005 Prepared by: Bennett

元器件交易网RLIGHT ELECTRONICS CO.,LTD.

67-21SUGC/S400-XX/TR8

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.

Note: The tolerances unless mentioned is ±0.1mm

Moisture Resistant Packaging

LabelAluminum moisture-proof bagDesiccantLabel

Everlight Electronics Co., Ltd. Rev. 3 Page: 6 of 9

Device No. : DSE-671-213 prepared date:07-29-2005 Prepared by: Bennett

元器件交易网RLIGHT ELECTRONICS CO.,LTD.

67-21SUGC/S400-XX/TR8

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

Test Sample

No. Items Test Condition Ac/ReHours/Cycles Size

Temp. : 260℃±5℃6 min

1 Reflow Soldering 22 PCS. Min. 5sec.

H : +100℃ 15min

300 Cycles

22 PCS.2 Temperature Cycle

∫ 5 min

L : -40℃ 15min

H : +100℃ 5min

3 Thermal Shock

∫ 10 sec

L : -10℃ 5min

High Temperature

Temp. : 100℃

4

Storage

Low Temperature

Temp. : -40℃

5

Storage

6

7

0/1

0/1

300 Cycles

22 PCS.1000 Hrs.

1000 Hrs.

1000 Hrs.

1000 Hrs.

22 PCS.22 PCS.22 PCS.22 PCS.0/1

0/1

0/1

0/1

0/1

DC Operating Life

High Temperature /

High Humidity

IF = 20 mA

85℃/ 85%RH

Everlight Electronics Co., Ltd. Rev. 3 Page: 7 of 9

Device No. : DSE-671-213 prepared date:07-29-2005 Prepared by: Bennett

元器件交易网RLIGHT ELECTRONICS CO.,LTD.

67-21SUGC/S400-XX/TR8

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

ing Iron

Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more

intervals, and do soldering of each terminal. Be careful because the damage of the product is often

started at the time of the hand solder.

Everlight Electronics Co., Ltd. Rev. 3 Page: 8 of 9

Device No. : DSE-671-213 prepared date:07-29-2005 Prepared by: Bennett

元器件交易网RLIGHT ELECTRONICS CO.,LTD.

67-21SUGC/S400-XX/TR8

ing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C

Everlight Electronics Co., Ltd. Rev. 3 Page: 9 of 9

Device No. : DSE-671-213 prepared date:07-29-2005 Prepared by: Bennett