大众汽车标准_VW_10500

2024年3月6日发(作者：路虎极光加长版)

Company Designation, Parts Identification

Guidelines for Use

Konzernnorm

Key words: company designation, brand, wordmark, parts identification, logo

The

English

translation

is

believed

to

be

accurate.

In

case

of

discrepancies

the

German

version

shall

govern.

VW

105 00

1

2

2.1

2.2

3

3.1

3.2

3.3

3.4

3.5

3.6

3.7

3.8

4

4.1

5

6

7

Contents

2

Company designation, 2

2

Wordmark of the Volkswagen Group - \"Volkswagen AG\"...................................................2

Overview of vehicle 2

Logos - VW 2

Country of origin - VW .2

Manufacturer’s code - VW 105 40-1, VW 2

Part number (drawing number) - VW 2

Date marking - VW 2

Material designation - 3

Identification required by law or 3

Identification of vehicle parts that require archiving - VW 3

3

.4

Identification of 4

Vehicle 4

4

Changes

The following changes have been made as compared to Volkswagen standard VW 105 00,

2002-06:

-

-

-

-

Section 2.1: paragraphs 1 and 2 revised,

Section 3.6: note for application for material designation of assemblies added

Section 3.8: note on retraceability and 2-D code added

Section 4: “4-VE-4 (Spare Parts Product Definition)” changed to “4-VO-4 (Original Parts

Product Definition)”

Previous issues:

2002-06; 1988-01

Form

FE

41

-

01.03

Page 1 of 4

Fachverantwortung/Responsibility

EZTD Kühn

Confidential. All rights reserved. No part of this document may be transmitted or reproduced without the prior written permission of a Standards Department of the Volkswagen Group.

Parties to a contract can only obtain this standard via the responsible procurement department.

Normung/Standards (EZTD, 1733)

Kühn Tel.: +49-5361-9 23370

Sobanski

? VOLKSWAGEN AG

QUELLE:

NOLISNorm

vor

Anwendung

auf

Aktualit?t

prüfen

/

Check

standard

for

current

issue

prior

to

usage.

Klass.-Nr./Class. No. 01 15 0 November 2003

Page 2

VW 105 00: 2003-11

1 Scope

This standard includes notes on the use of the company designation and the corporate wordmark

\"Volkswagen AG\" and provides an overview of the identifications used for vehicle parts.

2 Company designation, wordmark

2.1 Company designation

Company designations, such as \"Volkswagen Aktiengesellschaft\", are registered and legally

protected company codes.

In general, they identify factories, services, objects, information, memos etc. as belonging to a

certain company.

2.2 Wordmark of the Volkswagen Group - \"Volkswagen AG\"

The wordmark \"Volkswagen AG\" is the exclusive Group brand. This brand is a registered

trademark of Volkswagen AG and legally protected as such. It serves for identifying the origin of

products and services produced by Volkswagen AG. It aims to symbolize both the unobtrusive self-image and the international importance of Volkswagen AG.

3

3.1

Overview of vehicle parts identifications1

Logos - VW 105 14

Logos acc. to this standard shall serve to identify original parts and to exclude unjustified claims in

the case of product liability.

3.2 Country of origin - VW 105 50

Identification with the country of origin shall be based on existing laws and customs regulations.

3.3 Manufacturer’s code - VW 105 40-1, VW 105 40-7

Identification with the manufacturer’s code shall serve to identify the vehicle part manufacturer in

the event of damage or product liability as well as the retraceability of parts.

3.4 Part number (drawing number) - VW 010 98

The identification of vehicle parts with the part number establishes the connection to the drawings

and makes them easy to find in the spare parts areas and repair workshops.

3.5 Date marking - VW 105 60

Date marking is required to fulfill official requirements, to sort goods acc. to their indates and, in the

event of damage, to ensure that the parts can be retraced.

1 Notes for application, examples of entries, dimensions, etc. are provided in the standards named in Section 3.

Page 3

VW 105 00: 2003-11

3.6 Material designation - VDA 260

All plastic vehicle components (including textiles) shall be identified acc. to VDA 260.

Identification shall be applied at appropriate location so that the appearance of the product is not

affected negatively.

Assemblies such as seats, door trim panels, dashboards, etc. which are permanently attached to

one another and whose material designation is not visible after installation, shall be provided with

the specifications of the single parts.

Metallic vehicle components shall be marked acc. to VDA 260, if pure-type recycling is

economically viable or required for environmental reasons.

3.7 Identification required by law or governmental agencies

These identifications, for instance type approval marks on electric bulbs, strength specifications on

high-strength joining elements, approval marks on safety glass, identification of hazardous

substances, must be applied in a clearly visible manner at a suitable location on the respective

parts.

3.8 Identification of vehicle parts that require archiving - VW 010 64

In addition to the identifications described in Sections 3.1 to 3.7, vehicle parts or assemblies whose

data is recorded and archived over a long period of time for each vehicle to ensure retraceability,

shall be identified with a bar code or 2-D code acc. to VW 010 64.

4 Requirements

All vehicle parts from outside and in-house manufacturing, which are standard production parts,

spare parts, and accessories of the Volkswagen Group and its brands, must be identified acc. to

this standard.

The identification must be permanent, easily legible, and applied such that the part can be

identified as an original part even when it is in its installed condition.

The identification shall be defined on drawings, as described in VW 010 58, by means of the text

macro NO-E2 acc. to VW 010 14 and in the performance specifications.

For original parts of the vehicle brands of the Volkswagen Group, which are only sold as

assemblies, a single identification shall suffice. If parts from assemblies are also sold individually,

these shall likewise be identified.

Identification may only be omitted,

-

-

if the identification is technically impossible, e.g. in the case of small parts,

if the identification would impact negatively on the driving or operational safety of the vehicle.

If due to space restrictions only a partial identification is possible, the following order of priority is to

be observed (identifications that are not to be applied shall crossed out on the drawings):

1. Logos acc. to VW 105 14

2. Country of origin acc. to VW 105 50

3. Manufacturer’s code acc. to VW 105 40-1 (VW 105 40-7)

4. Part number

5. Date marking acc. to VW 105 60

6. Material code acc. to VDA 260

Alternative parts identification can be specified by the responsible design department in

consultation with 4-VO-4 (Original Parts Product Definition), Quality Assurance, and the Standards

Department EZTD Technical Documentation.

Page 4

VW 105 00: 2003-11

4.1 Designation

Entries in drawings and performance specifications:

Parts identification acc. to VW 105 00.

5 Identification of communications media

The brand logos for identifying communications media serve to clarify the corporate strategy. They

serve as graphic identification symbols for the Group brands and are used in advertising, forms,

company stationary, packaging, and similar.

They comply with the fundamental separation within the framework of the multi-brand strategy.

Brand logos shall not be combined. If the sender is actually several brands, these are combined

under the umbrella of the Volkswagen Group (see Section 2.2, Wordmark of the Volkswagen

Group).

Notes on use, as well as the relevant valid status of the brand logos, are contained in CI-Net (the

Corporate Identify Internet site) of the Group brands.

6 Vehicle product names

Product names such as Golf, Sharan, Audi TT, Fabia, Ibiza, etc. are sales designations stipulated

by the Marketing department and are registered wordmarks of Volkswagen AG. Spelling of these

wordmarks shall be uniform.

7 Referenced standards2

VW 010 14

VW 01058

VW 010 64

VW 010 98

VW 105 14

Technical Drawings; Drawing Frames and Text Macros

Technical Drawings; Type of Lettering

Coding on Vehicle Parts

Part Number System

Logos; Identification for Vehicle Parts

VW 105 40-1 Manufacturer’s code; For vehicle parts

VW 105 40-7 Identification of Valve Springs

VW 105 50

VW 105 60

VDA 260

Country of Origin Identification; Vehicle Parts

Date Marking; Vehicle Parts

Automotive Components, Identification of Materials (available only in German)

2 In this section terminological inconsistencies may occur as the original titles are used.