SMBJ7.0A中文资料_图文

2024年1月2日发(作者：黄海汽车suv)

元器件交易网G AND SMBJ5.0 THRU 170CASURFACE MOUNT TRANSZORB?TRANSIENT VOLTAGE SUPPRESSORStand-off Voltage-5.0 to170 Volts Peak Pulse Power-600 Watts

DO-214AAMODIFIED J-BENDFEATURES

0.155 (3.94)0.130 (3.30)0.086 (2.20)0.077 (1.95)0.180 (4.57)0.160 (4.06)0.012 (0.305)0.006 (0.152)0.096 (2.44)0.084 (2.13)0.060 (1.52)0.030 (0.76)0.220 (5.59)0.205 (5.21)0.008 (0.203)-215AAGULLWING? Plastic package has Underwriters Laboratory FlammabilityClassification 94V-0? For surface mounted applications in order to optimize

board space? Low profile package? Built-in strain relief? Glass passivated junction? Low incremental surge resistance?600W peak pulse power capability with a 10/1000?s

waveform, repetition rate (duty cycle): 0.01%? Excellent clamping capability? Fast response time: typically less than 1.0ps from 0 volts

to V(BR)for unidirectional and 5.0ns for bidirectional types? For devices with V(BR)≥10V, IDare typically less

than 1.0?A? High temperature soldering guaranteed:

250°C/10 seconds at terminals0.125 (3.17)0.115 (2.92)0.245 (6.22)0.130 (5.72)MECHANICALDATACase: JEDEC DO214AA/ DO215AAmolded plastic bodyover passivated junctionTerminals:Solder plated, solderable per MIL-STD-750,Method 2026Polarity: For unidirectional types the color band denotes thecathode, which is postitive with respect to the anode undernormal TVS operationMounting Position:AnyWeight:0.003 ounces, 0.093 gram0.280 (7.11)0.260 (6.60)0.016 (0.41)0.006 (0.15)0.020

(0.51) MAX.0.058 (1.47)0.038 (0.97)0.400 (10.16)0.380 (9.64)0.032 (8.10)0.024 (6.10)0.095 (2.41)0.075 (1.90)0.008 (0.20)0.004 (0.10)SEATINGPLANEDimensions in inches and (millimeters)DEVICES FOR BIDIRECTIONALAPPLICATIONSFor bidirectional use suffix C or CAfor types SMB-5.0 thru SMB-170 (eg. SMBG5.0C, SMBJ170CA).Electrical characteristics apply in both directionsMAXIMUM RATINGS AND ELECTRICALCHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise SVALUEUNITSPeak pulse power dissipation with a 10/1000?s waveform(NOTES1, 2, FIG.1)Peak pulse current with a 10/1000?s waveform

(NOTE 1)Peak forward surge current 8.3ms single half sine-wave superimposedon rated load (JEDEC Method)

(NOTES2, 3)- unidirectional onlyMaximum instantaneous forward voltage at 50A(NOTE 3)

unidirectional onlyOperating junction and storage temperature rangeNOTES:(1) Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig. 2(2) Mounted on 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal(3) Measured on 8.3ms single half sine-wave. For uni-directional devices PMIFSMVFTJ, TSTGMinimum 600SEE TABLE 1WattsAmpsAmpsVolts°C100.03.5-55 to +1502/1/99

元器件交易网CTRICALCHARACTERISTICS (TA=25°C unless otherwise noted) TABLE 1Device TypeGull WingLeadSMBG5.0SMBG5.0ASMBG6.0SMBG6.0ASMBG6.5SMBG6.5ASMBG7.0SMBG7.0ASMBG7.5SMBG7.5ASMBG8.0SMBG8.0ASMBG8.5SMBG8.5ASMBG9.0SMBG9.0ASMBG10SMBG10ASMBG11SMBG11ASMBG12SMBG12ASMBG13SMBG13ASMBG14SMBG14ASMBG15SMBG15ASMBG16SMBG16ASMBG17SMBG17ASMBG18SMBG18ASMBG20SMBG20ASMBG22SMBG22ASMBG24SMBG24ASMBG26SMBG26ASMBG28SMBG28ASMBG30SMBG30ASMBG33SMBG33ASMBG36SMBG36ASMBG40SMBG40ASMBG43SMBG43ASMBG45SMBG45ASMBG48SMBG48ASMBG51SMBG51ADevice TypeModified“J” Bend LeadSMBJ5.0SMBJ5.0ASMBJ6.0SMBJ6.0ASMBJ6.5SMBJ6.5ASMBJ7.0SMBJ7.0ASMBJ7.5SMBJ7.5ASMBJ8.0SMBJ8.0ASMBJ8.5SMBJ8.5ASMBJ9.0SMBJ9.0ASMBJ10SMBJ10ASMBJ11SMBJ11ASMBJ12SMBJ12ASMBJ13SMBJ13ASMBJ14SMBJ14ASMBJ15SMBJ15ASMBJ16SMBJ16ASMBJ17SMBJ17ASMBJ18SMBJ18ASMBJ20SMBJ20ASMBJ22SMBJ22ASMBJ24SMBJ24ASMBJ26SMBJ26ASMBJ28SMBJ28ASMBJ30SMBJ30ASMBJ33SMBJ33ASMBJ36SMBJ36ASMBJ40SMBJ40ASMBJ43SMBJ43ASMBJ45SMBJ45ASMBJ48SMBJ48ASMBJ51SMBJ51ADeviceMarkingCode

UNI BIKDKEKFKGKHKKKLKMKNKPKQKRKSKTKUKVKWKXKYKZLDLELFLGLHLKLLLMLNLPLQLRLSLTLULVLWLXLYLZMDMEMFMGMHMKMLMMMNMPMQMRMSMTMUMVMWMXMYMZKDKEKFKGAHAKKLKMANAPAQARASATAUAVAWAXKYKZBDBELFLGBHBKBLBMLNLMLQLRBSBTLULVBWBXBYBZCDCEMFMGCHCKCLCMCNCPCQCRCSCTMUMVMWMXMYMZBreakdownVoltageV(BR)(Volts)(NOTE 1)(MIN /MAX)6.40 / 7.826.40 / 7.076.67 / 8.156.67 / 7.377.22 / 8.827.22 / 7.987.78 / 9.517.78 / 8.608.33 / 10.28.33 / 9.218.89 / 10.98.89 / 9.839.44 / 11.59.44 / 10.410.0 / 12.210.0 / 11.111.1 / 13.611.1 / 12.312.2 / 14.912.2 / 13.513.3 / 16.313.3 / 14.714.4 / 17,614.4 / 15.915,6 / 19.115.6 / 17.216.7 / 20.416.7 / 18.5178 / 21.8178 / 19.718.9 / 23.118.9 / 20.920.0 / 24.420.0 / 22.122.2 / 27.122.2 / 24.524.4 / 29.824.4 / 26.926.7 / 32.626.7 / 29.528.9 / 35.328.9 / 31.931.1 / 38.031.1 / 34.433.3 / 40.733.3 / 36.836.7 / 44.936.7 / 40.640.0 / 48.940.0 / 44.244.4 / 54.344.4 / 49.147.8 / 58.447.8 / 52.850.0 / 61.150.0 / 55.353.3 / 65.153.3 / 58.956.7 / 69-356.7 / 62.7TestCurrentat IT(mA)10101.01.01.01.01.01.01.01.01.01.01.01\'01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.0Stand-offVoltageVWM(Volts)5.05.06.06.06.56.57.07.07.57.58.08.08.58.59.09.2582626282838485151MaximumReverseLeakage IDat VWM(?A)

(NOTE 3)8010105.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.0MaximumPeak PulseSurgeCurrent IPPM(NOTE 2)(Amps)62.565.252.658.348.853.645.150.042.046.540.044.137.741.735.539.031.935.329.933.027.330.225.227.923.325.922.324.620.823.119.721.718.620.516.818.515.216.914.015.412.914.312.013.211.212.410.211.39.310.38.49.37.88.67.58.37.07.86.67.3Maximum

ClampingVoltage at IPPMVC(Volts)9.69.211.410.312.311.213.312.014.312.915.013.615.914.416.915.418.817.020.118.222.019.923.821.525.823.226.924.428.826.030.527.632.229.235.832.439.435.543.038.946.642.150.045.453.548.459.053.364.358.171.464.576.769.480.372.785.577.491.182.4

元器件交易网CTRICALCHARACTERISTICS (TA=

25°C unless otherwise noted) TABLE 1 (Cont’d)Device TypeGull WingLeadSMBG54SMBG54ASMBG58SMBG58ASMBG60SMBG60ASMBG64SMBG64ASMBG70SMBG70ASMBG75SMBG75ASMBG78SMBG78ASMBG85SMBG85ASMBG90SMBG90ASMBG100SMBG100ASMBG110SMBG110ASMBG120SMBG120ASMBG130SMBG130ASMBG150SMBG150ASMBG160SMBG160ASMBG170SMBG170ADevice TypeModified“J” Bend LeadSMBJ54SMBJ54ASMBJ58SMBJ58ASMBJ60SMBJ60ASMBJ64SMBJ64ASMBJ70SMBJ70ASMBJ75SMBJ75ASMBJ78SMBJ78ASMBJ85SMBJ85ASMBJ90SMBJ90ASMBJ100SMBJ100ASMBJ110SMBJ110ASMBJ120SMBJ120ASMBJ130SMBJ130ASMBJ150SMBJ150ASMBJ160SMBJ160ASMBJ170SMBJ170ADeviceMarkingCode

UNI BINDNENFNGNHNKNLNMNNNPNQNRNSNTNUNVNWNXNYNZPDPEPFPGPHPKPLPMPNPPPQPRNDNENFNGNHNKNLNMNNNPNQNRNSNTNUNVNWNXNYNZPDPEPFPGPHPKPLPMPNPPPQPRBreakdownVoltageV(BR)

(Volts)(NOTE 1)(Min /Max)60.0 / 73.360.0 / 66.364.4 / 78.764.4 / 71.266.7 / 81.566.7 / 73.771.1 / 86.971.1 / 78.677.8 / 95.177.8 / 86.083.3 / 10283.3 / 92.186.7 / 10686.7 / 95.894.4 / 11594.4 / 104100 / 122100 / 111111 / 136111 / 123122 / 149122 / 135133 / 163133 / 147144 / 176144 / 159167 / 204167 / 185178 / 218178 / 197189 / 231189 / 209TestCurrentat IT(mA)1.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.01.0Stand-offVoltageVWM(Volts)545458586575787885859110170170MaximumReverseLeakage IDat VWM(?A)(NOTE 3)5.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.05.06.05.05.05.05.05.05.05.05.05.05.05.05.05.05.0MaximumPeak PulseSurgeCurrent IPPM(NOTE 2)(Amps)6.26.95.86.45.66.25.35.84.85.34.55.04.34.84.04.43.84.13.43.73.13.42.83.12.62.92.22.52.12.32.02.2Maximum

ClampingVoltage at IPPMVC(Volts)96.387.110393.610796.8672304275NOTES:(1) V(BR)

measured after ITapplied for 300?s square wave pulse or equivalent(2) Surge current waveform per Fig. 3 and derate per Fig. 2(3) For bi-directional types having VWMof 10 Volts and less, the ID

limit is doubled(4) For the bi-directional SMBG/SMBJ5.0CA, the maximum V(BR)is 7.25 Volts(5) All terms and symbols are consistent with ANSI/IEEE C62.35APPLICATION N0TESThese surface mountable packages are designed specifically for transient voltage suppression. The wide leads assure a large sur-face contact for good heat dissipation, and a low resistance path for surge current flow to ground. These high speed transient voltagesuppressors can be used to effectively protect sensitive components such as integrated circuits and MOS devices.A600W (SMB) device is normally selected when the threat of transients is from lightening-induced transients conducted via externalleads or 1/0 lines. It is also used to protect against switching transients induced by large coils or industrial motors.

System impedance at component level in a system is usually high enough to limit the current to within the peak pulse current (IPP)

rating of this ENDED PAD SIZESThe pad dimensions should be 0.010” (0.25mm) longer than the contact size, in the lead axis.

This allows a solder fillet to form, see Fig. below. Contact factory for soldering - WINGMODIFIED J-BEND0.090\" (2.28)0.165\" (4.19)0.085\" (2.16)0.085\" (2.16)0.070\" (1.78)0.050\" (1.27)

元器件交易网IMUM RATINGS AND CHARACTERISTIC CURVES SMBG AND SMBJ5.0 THRU 170CAFIG. 1 - PEAK PULSE POWER RATING CURVE100NON-REPETITIVEWPULSE WAVEFORMk

,SHOWN IN FIG. 3RETA=25°CWOP10

ESLUP

KAE1.0P

,MPPP0.2 x 0.2” (0.5 x 0.5mm)0.1COPPER PADAREAS0.1?s1.0?s10?s100?s1.0ms10mstd, PULSEWIDTH, . 3 - PULSE WAVEFORM150%PULSE WIDTH (td) is DEFINED

as thePOINTWHERE thePEAKT,tr=10?NTDECAYSto 50% of IPPMERPEAK VALUERU100IPPMC

ESHALF VALUE - IPPLU2P

KA50EP10/1000?sec. WAVEFORM,asDEFINED 0td01.02.03.04.0t, TIME, msFIG. 5 - TYPICALJUNCTION CAPACITANCEBIDIRECTIONAL6,000TJ=25°Cf=1.0 MHZVsig=50mVp-pFMEASUREDatp

ZERO BIAS,E1,000CNTAICPAMEASURED atACSTAND-OFF

NVOLTAGE, VWMOITCN100UJ

,JC1VWM,REVERSE STAND-OFF VOLTAGE,

VOLTS)FIG. 2 - PULSE DERATING CURVEPPI(100TNE%R

,REUG75C

TAroN

)EPCPPR(E50

ENWI

OGPNI25

ESATLRUEPD

K0A5150175200EPTA, AMBIENTTEMPERATURE, °CFIG. 4 - TYPICALJUNCTION CAPACITANCE6,000UNIDIRECTIONALTJ=25°Cf=1.0 MHZVsig=50mVp-pMEASURED atZERO BIASFp

,1,000ECNTAICMEASURED atPAASTAND-OFFCVOLTAGE, VWM