2024年1月7日发(作者:奔驰slk硬顶敞篷跑车)
Contrax and Empax Polypropylene
Safety Data Sheet
1.1. Product Identifier
Product Form: Article
Product Name: Contrax and Empax Polypropylene
Synonyms: Contrax?/Empax? (Polypropylene) Strapping
1.2. Intended Use of the Product Not available
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations
Revision Date: 05/11/2015Date of issue: 05/11/2015
Version: 1.0
1.3. Name, Address, and Telephone of the Responsible Party
Signode Industrial Group
3650 West Lake Avenue
Glenview, IL 60026
800-323-2464
1.4. Emergency Telephone Number
: N/A Emergency Number
2.1.
OSHA Regulatory status: This product is considered an “article” per Title 29 of U.S. Code of Federal Regulations Part 1910.1200. A
material safety data sheet is not required but provided as a service to the user. Under normal conditions of use, users of the product
cannot be exposed to its contents. If the article is damaged and/or material is released, contents are not harmful. For informational
purposes, this product would have the following OSHA classification;
This product is considered to be a non-hazardous substance under OSHA standard 29 CFR 1910.1200.
WHMIS information: This product is considered to be a \'manufactured article\'. Under normal conditions of use, users of the product
cannot be exposed to its contents. If the article is damaged and/or material is released, contents are not harmful. For informational
purposes, this product would have the following WHMIS classification:
This product is not a WHMIS controlled product in Canada. It does not meet any of the criteria for a controlled product provided in
Part IV of the Controlled Products Regulations (CPR).
Classification of the Substance or Mixture
Classification (GHS-US)
Not classified
2.2.
Label Elements
Unknown Acute Toxicity (GHS-US)
No data available
No additional information available
2.4.
3.1.
3.2.
Substances
Mixture
Product Identifier
(CAS No) Proprietary
%
Proprietary
Classification (GHS-US)
Not classified
Not applicable
Name
Proprietary
Full text of H-phrases: see section 16
SECTION 4: FIRST AID MEASURES
4.1.
Description of First Aid Measures
General: Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label if possible).
Inhalation: Remove to fresh air and keep at rest in a position comfortable for breathing. Obtain medical attention if breathing
difficulty persists.
Skin Contact: Rinse cautiously with water. Obtain medical attention if irritation develops or persists.
Eye Contact: Rinse cautiously with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain
medical attention.
05/11/2015 EN (English US) 1/5
Contrax and Empax Polypropylene
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations
Ingestion: Do NOT induce vomiting. Rinse mouth. If you feel unwell, obtain medical attention
4.2. Most Important Symptoms and Effects Both Acute and Delayed
General: This product is a solid plastic material that poses no hazard during normal conditions of use.
Inhalation: Not expected (material is a solid)
Skin Contact: No irritation or sensitization expected
Eye Contact: Eye contact with small pieces may cause mechanical irritation.
Ingestion: Not expected to occur but no effects other than choking are expected
Chronic Symptoms: None expected under normal conditions of use.
4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed
If you feel unwell, seek medical advice (show the label where possible).
5.1. Extinguishing Media
Suitable Extinguishing Media: Use extinguishing media appropriate for surrounding fire.
Unsuitable Extinguishing Media: Do not use a heavy water stream. Use of heavy stream of water may spread fire. Application of
water stream to hot product may cause frothing and increase fire intensity.
5.2. Special Hazards Arising From the Substance or Mixture
Fire Hazard: Not flammable.
Explosion Hazard: Product is not explosive.
Reactivity: Hazardous reactions will not occur under normal conditions.
5.3. Advice for Firefighters
Precautionary Measures Fire: Exercise caution when fighting any chemical fire.
Firefighting Instructions: Use water spray or fog for cooling exposed containers.
Protection During Firefighting: Do not enter fire area without proper protective equipment, including respiratory protection.
Hazardous Combustion Products: Thermal decomposition or burning may produce carbon monoxide, carbon dioxide, aldehydes and
other organic polymeric fumes.
Reference to Other Sections
Refer to section 9 for flammability properties.
6.1. Personal Precautions, Protective Equipment and Emergency Procedures
General Measures: Avoid all contact with skin, eyes, or clothing. Avoid breathing dust.
6.1.1. For Non-Emergency Personnel
Protective Equipment: Use appropriate personal protection equipment (PPE).
Emergency Procedures: Evacuate unnecessary personnel.
6.1.2. For Emergency Personnel
Protective Equipment: Equip cleanup crew with proper protection.
Emergency Procedures: Ventilate area.
6.2. Environmental Precautions
Prevent entry to sewers and public waters.
6.3. Methods and Material for Containment and Cleaning Up
For Containment: Sweep or vacuum the product to recover it. Vacuum must be fitted with HEPA filter to prevent release of
particulates during clean-up.
Methods for Cleaning Up: Clean up spills immediately and dispose of waste safely. Recover the product by vacuuming, shoveling or
sweeping. Contact competent authorities after a spill.
6.4. Reference to Other Sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
7.1. Precautions for Safe Handling
Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas
with mild soap and water before eating, drinking or smoking and when leaving work.
7.2. Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures: Comply with applicable regulations.
05/11/2015 EN (English US) 2/5
Contrax and Empax Polypropylene
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations
Storage Conditions: Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Keep/Store away from
direct sunlight, extremely high or low temperatures and incompatible materials.
Incompatible Materials: Strong acids. Strong bases. Strong oxidizers.
7.3. Specific End Use(s) Not available
8.1. Control Parameters
For substances listed in section 3 that are not listed here, there are no established Exposure limits from the manufacturer, supplier,
importer, or the appropriate advisory agency including: ACGIH (TLV), NIOSH (REL), OSHA (PEL), Canadian provincial governments, or
the Mexican government.8.2. Exposure Controls
Appropriate Engineering Controls: Ensure adequate ventilation, especially in confined areas. Emergency eye wash fountains and
safety showers should be available in the immediate vicinity of any potential exposure. Ensure all national/local regulations are
observed.
Personal Protective Equipment: Protective goggles. Gloves. Protective clothing.
Materials for Protective Clothing: Not required for normal conditions of use.
Hand Protection: Protective Gloves.
Eye Protection: Protective goggles.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: None required under normal product handling conditions.
Environmental Exposure Controls: Do not allow the product to be released into the environment.
Consumer Exposure Controls: Do not eat, drink or smoke during use.
9.1. Information on Basic Physical and Chemical Properties
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Solid
Clear, various colors
None
Not available
Not available
Not available
265 - 340 °F (129.4 - 171.1°C)
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available
0.9
Water: Insoluble
Not available
Not available
Not expected to present an explosion hazard due to mechanical impact.
Physical State
Appearance
Odor
Odor Threshold
pH
Evaporation Rate
Melting Point
Freezing Point
Boiling Point
Flash Point
Auto-ignition Temperature
Decomposition Temperature
Flammability (solid, gas)
Lower Flammable Limit
Upper Flammable Limit
Vapor Pressure
Relative Vapor Density at 20 °C
Relative Density
Specific Gravity
Solubility
Partition Coefficient: N-Octanol/Water
Viscosity
Explosion Data – Sensitivity to Mechanical Impact
05/11/2015 EN (English US) 3/5
Contrax and Empax Polypropylene
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations
Explosion Data – Sensitivity to Static Discharge : Not expected to present an explosion hazard due to static discharge.
10.1. Reactivity: Hazardous reactions will not occur under normal conditions.
10.2. Chemical Stability: Product is stable.
10.3. Possibility of Hazardous Reactions: Hazardous polymerization will not occur.
10.4. Conditions to Avoid: Direct sunlight, extremely high or low temperatures, and incompatible materials.
10.5. Incompatible Materials: Strong acids, strong bases, strong oxidizers.
10.6. Hazardous Decomposition Products: Thermal decomposition or burning may produce carbon monoxide, carbon dioxide,
aldehydes and other organic polymeric fumes.
11.1. Information on Toxicological Effects - Product
Acute Toxicity: Not classified
LD50 and LC50 Data: Not available
Skin Corrosion/Irritation: Not classified
Serious Eye Damage/Irritation: Not classified
Respiratory or Skin Sensitization: Not classified
Germ Cell Mutagenicity: Not classified
Teratogenicity: Not available
Carcinogenicity: Not classified
Specific Target Organ Toxicity (Repeated Exposure): Not classified
Reproductive Toxicity: Not classified
Specific Target Organ Toxicity (Single Exposure): Not classified
Aspiration Hazard: Not classified
Symptoms/Injuries After Inhalation: Not expected (material is a solid)
Symptoms/Injuries After Skin Contact: No irritation or sensitization expected
Symptoms/Injuries After Eye Contact: Eye contact with small pieces may cause mechanical irritation.
Symptoms/Injuries After Ingestion: Not expected to occur but no effects other than choking are expected
Chronic Symptoms: None expected under normal conditions of use.
11.2. Information on Toxicological Effects - Ingredient(s)
LD50 and LC50 Data: Not available
12.1. Toxicity Ecotoxicological data have not been determined specifically for this product. Solid plastic is generally inert and
would be expected to have low ecotoxicity.
12.2.
12.3.
12.4.
12.5.
Persistence and Degradability Not available
Bioaccumulative Potential Not available
Mobility in Soil
Not available
Other Adverse Effects
Other Information: Avoid release to the environment.
13.1. Waste treatment methods
Waste Disposal Recommendations: Dispose of waste material in accordance with all local, regional, national, provincial, territorial
and international regulations.
Recycling is recommended.
14.1. In Accordance with DOT Not regulated for transport
14.2. In Accordance with IMDG Not regulated for transport
14.3. In Accordance with IATA Not regulated for transport
14.4. In Accordance with TDG Not regulated for transport
05/11/2015 EN (English US) 4/5
Contrax and Empax Polypropylene
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations
15.1. US Federal Regulations
Neither this product nor its chemical components appear on any US federal lists.
15.2. US State Regulations
Neither this product nor its chemical components appear on any US state lists.
15.3. Canadian Regulations
Contrax and Empax Polypropylene
WHMIS Classification This is not a controlled product under WHMIS. This product meets the definition of a “manufactured
article” and is not subject to the regulations of the Hazardous Products Act.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the SDS
contains all of the information required by CPR.
SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION
Revision Date
Other Information
:
05/11/2015
: This document has been prepared in accordance with the SDS requirements of the OSHA
Hazard Communication Standard 29 CFR 1910.1200.
Party Responsible for the Preparation of This Document
Signode Industrial Group
3650 West Lake Avenue
Glenview, IL 60026
800-323-2464
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and
environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product.
North America GHS US 2012 & WHMIS 2
05/11/2015 EN (English US) 5/5
更多推荐
硬顶,奔驰,跑车,作者
发布评论