2024年3月6日发(作者：英菲尼迪2021款)
Company Designation, Parts Identification
Guidelines for Use
Konzernnorm
Key words: company designation, brand, wordmark, parts identification, logo
The
English
translation
is
believed
to
be
accurate.
In
case
of
discrepancies
the
German
version
shall
govern.
VW
105 00
1
2
2.1
2.2
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
4
4.1
5
6
7
Contents
2
Company designation, 2
2
Wordmark of the Volkswagen Group - \"Volkswagen AG\"...................................................2
Overview of vehicle 2
Logos - VW 2
Country of origin - VW .2
Manufacturer’s code - VW 105 40-1, VW 2
Part number (drawing number) - VW 2
Date marking - VW 2
Material designation - 3
Identification required by law or 3
Identification of vehicle parts that require archiving - VW 3
3
.4
Identification of 4
Vehicle 4
4
Changes
The following changes have been made as compared to Volkswagen standard VW 105 00,
2002-06:
-
-
-
-
Section 2.1: paragraphs 1 and 2 revised,
Section 3.6: note for application for material designation of assemblies added
Section 3.8: note on retraceability and 2-D code added
Section 4: “4-VE-4 (Spare Parts Product Definition)” changed to “4-VO-4 (Original Parts
Product Definition)”
Previous issues:
2002-06; 1988-01
Form
FE
41
-
01.03
Page 1 of 4
Fachverantwortung/Responsibility
EZTD Kühn
Confidential. All rights reserved. No part of this document may be transmitted or reproduced without the prior written permission of a Standards Department of the Volkswagen Group.
Parties to a contract can only obtain this standard via the responsible procurement department.
Normung/Standards (EZTD, 1733)
Kühn Tel.: +49-5361-9 23370
Sobanski
? VOLKSWAGEN AG
QUELLE:
NOLISNorm
vor
Anwendung
auf
Aktualit?t
prüfen
/
Check
standard
for
current
issue
prior
to
usage.
Klass.-Nr./Class. No. 01 15 0 November 2003
Page 2
VW 105 00: 2003-11
1 Scope
This standard includes notes on the use of the company designation and the corporate wordmark
\"Volkswagen AG\" and provides an overview of the identifications used for vehicle parts.
2 Company designation, wordmark
2.1 Company designation
Company designations, such as \"Volkswagen Aktiengesellschaft\", are registered and legally
protected company codes.
In general, they identify factories, services, objects, information, memos etc. as belonging to a
certain company.
2.2 Wordmark of the Volkswagen Group - \"Volkswagen AG\"
The wordmark \"Volkswagen AG\" is the exclusive Group brand. This brand is a registered
trademark of Volkswagen AG and legally protected as such. It serves for identifying the origin of
products and services produced by Volkswagen AG. It aims to symbolize both the unobtrusive self-image and the international importance of Volkswagen AG.
3
3.1
Overview of vehicle parts identifications1
Logos - VW 105 14
Logos acc. to this standard shall serve to identify original parts and to exclude unjustified claims in
the case of product liability.
3.2 Country of origin - VW 105 50
Identification with the country of origin shall be based on existing laws and customs regulations.
3.3 Manufacturer’s code - VW 105 40-1, VW 105 40-7
Identification with the manufacturer’s code shall serve to identify the vehicle part manufacturer in
the event of damage or product liability as well as the retraceability of parts.
3.4 Part number (drawing number) - VW 010 98
The identification of vehicle parts with the part number establishes the connection to the drawings
and makes them easy to find in the spare parts areas and repair workshops.
3.5 Date marking - VW 105 60
Date marking is required to fulfill official requirements, to sort goods acc. to their indates and, in the
event of damage, to ensure that the parts can be retraced.
1 Notes for application, examples of entries, dimensions, etc. are provided in the standards named in Section 3.
Page 3
VW 105 00: 2003-11
3.6 Material designation - VDA 260
All plastic vehicle components (including textiles) shall be identified acc. to VDA 260.
Identification shall be applied at appropriate location so that the appearance of the product is not
affected negatively.
Assemblies such as seats, door trim panels, dashboards, etc. which are permanently attached to
one another and whose material designation is not visible after installation, shall be provided with
the specifications of the single parts.
Metallic vehicle components shall be marked acc. to VDA 260, if pure-type recycling is
economically viable or required for environmental reasons.
3.7 Identification required by law or governmental agencies
These identifications, for instance type approval marks on electric bulbs, strength specifications on
high-strength joining elements, approval marks on safety glass, identification of hazardous
substances, must be applied in a clearly visible manner at a suitable location on the respective
parts.
3.8 Identification of vehicle parts that require archiving - VW 010 64
In addition to the identifications described in Sections 3.1 to 3.7, vehicle parts or assemblies whose
data is recorded and archived over a long period of time for each vehicle to ensure retraceability,
shall be identified with a bar code or 2-D code acc. to VW 010 64.
4 Requirements
All vehicle parts from outside and in-house manufacturing, which are standard production parts,
spare parts, and accessories of the Volkswagen Group and its brands, must be identified acc. to
this standard.
The identification must be permanent, easily legible, and applied such that the part can be
identified as an original part even when it is in its installed condition.
The identification shall be defined on drawings, as described in VW 010 58, by means of the text
macro NO-E2 acc. to VW 010 14 and in the performance specifications.
For original parts of the vehicle brands of the Volkswagen Group, which are only sold as
assemblies, a single identification shall suffice. If parts from assemblies are also sold individually,
these shall likewise be identified.
Identification may only be omitted,
-
-
if the identification is technically impossible, e.g. in the case of small parts,
if the identification would impact negatively on the driving or operational safety of the vehicle.
If due to space restrictions only a partial identification is possible, the following order of priority is to
be observed (identifications that are not to be applied shall crossed out on the drawings):
1. Logos acc. to VW 105 14
2. Country of origin acc. to VW 105 50
3. Manufacturer’s code acc. to VW 105 40-1 (VW 105 40-7)
4. Part number
5. Date marking acc. to VW 105 60
6. Material code acc. to VDA 260
Alternative parts identification can be specified by the responsible design department in
consultation with 4-VO-4 (Original Parts Product Definition), Quality Assurance, and the Standards
Department EZTD Technical Documentation.
Page 4
VW 105 00: 2003-11
4.1 Designation
Entries in drawings and performance specifications:
Parts identification acc. to VW 105 00.
5 Identification of communications media
The brand logos for identifying communications media serve to clarify the corporate strategy. They
serve as graphic identification symbols for the Group brands and are used in advertising, forms,
company stationary, packaging, and similar.
They comply with the fundamental separation within the framework of the multi-brand strategy.
Brand logos shall not be combined. If the sender is actually several brands, these are combined
under the umbrella of the Volkswagen Group (see Section 2.2, Wordmark of the Volkswagen
Group).
Notes on use, as well as the relevant valid status of the brand logos, are contained in CI-Net (the
Corporate Identify Internet site) of the Group brands.
6 Vehicle product names
Product names such as Golf, Sharan, Audi TT, Fabia, Ibiza, etc. are sales designations stipulated
by the Marketing department and are registered wordmarks of Volkswagen AG. Spelling of these
wordmarks shall be uniform.
7 Referenced standards2
VW 010 14
VW 01058
VW 010 64
VW 010 98
VW 105 14
Technical Drawings; Drawing Frames and Text Macros
Technical Drawings; Type of Lettering
Coding on Vehicle Parts
Part Number System
Logos; Identification for Vehicle Parts
VW 105 40-1 Manufacturer’s code; For vehicle parts
VW 105 40-7 Identification of Valve Springs
VW 105 50
VW 105 60
VDA 260
Country of Origin Identification; Vehicle Parts
Date Marking; Vehicle Parts
Automotive Components, Identification of Materials (available only in German)
2 In this section terminological inconsistencies may occur as the original titles are used.
更多推荐
发布评论